AMI UEECH207-20 Hanger Unit Bearings

Designation of housing:PAE204N-; B:34 mm; A:32 mm; C0:6.65 kN; d:15 mm; S:17 mm; H1:9 mm; T min.:-20 °C; J:50.8 mm; H:33.3 mm;

L:125 mm; d:17 mm; T max.:100 °C; H2:57 mm; G:M6x1; Designation of open end cover:SCO203-17; H:30.2 mm; Dz:46 mm; C:9.55 kN; T min.:-40 °C;

Weight:1.61 kg; S:17.5 mm; N1:16 mm; G:M6x1; N2:37 mm; L3:64 mm; SW:3.97 mm; H1:89 mm; A2:30 mm; Designation of housing:T207-;

Bearing Bore Shape:Round; Expansion Type:Non-Expansion; Manufacturing Plant Location:Rogersville, TN; Bearing Family:Setscrew Ball Bearin; End Cap Groove:No; Bearing Duty:Intermediate Duty; Housing Material:Cast Iron; Grease Type:Unirex N2; Bearing Insert Material:Steel; UPC:782475796557;

T min.:-20 °C; B:30.2 mm; d1:62 mm; s1:33.4 mm; N:14mm; B1:43.7 mm; A:40 mm; C0:20.8 kN; e:24 mm; Designation of bearing:ES209-28G2T20;

Characteristic outer ring frequency, BPF0:5.12 Hz; Characteristic cage frequency, FTF:0.43 Hz; Characteristic inner ring frequency, BPFI:6.88 Hz; da min:45 mm; D:68 mm; Dynamic load, C:16.8 kN; d:40 mm; Da max:63 mm; Static load, C0:11.5 kN; Radial clearance class:CN;

J1:40 mm; A1:12 mm; S:17 mm; e:15 mm; Weight:0.59 kg; B1:43.5 mm; H:102 mm; A2:41.5 mm; C0:6.65 kN; d1:32.4 mm;

C:14 kN; A2:37.5 mm; H3:60; d1:38 mm; Designation of housing:FLZ205-; A:32.5 mm; Designation of bearing:UK205G2H; B:21 mm; A1:12 mm; N:11,5mm;

B:55.4 mm; T max.:100 °C; L1:32 mm; H1:16 mm; E:20 mm; L:150 mm; N:M16; Designation of bearing:EX211-32G2L3; d:50.8 mm; H2:125 mm;

E:21 mm; A2:30 mm; Weight:0.6 kg; L3:38 mm; Designation of bearing:US203-11G2T20; Designation of housing:EHE203-; G:M6x1; d:17.46 mm; B:22 mm; S:6 mm;

d:31.75 mm; A2:45.4 mm; G:R1/8"; Dz:80 mm; N:14mm; C0:15.2 kN; T max.:100 °C; H:155 mm; T min.:-20 °C; Weight:1.18 kg;

N:14mm; L:90 mm; J1:45 mm; e:15 mm; B:25.4 mm; G:R1/8"; A2:44.4 mm; L1:75 mm; H3:82.5; s1:30.2 mm;

T max.:100 °C; C1:6.8 mm; d:44.45 mm; T min.:-20 °C; m:8 mm; C:22 mm; B:49.2 mm; SW:3.97 mm; C0:20.8 kN; S:19 mm;

d:49.21 mm; L:115 mm; s1:25.8 mm; H:190 mm; Recommended tightening torque for set screw:16.8 Nm; A:40 mm; B:51.6 mm; J1:76 mm; A1:18 mm; Designation of bearing:UC210-31G2L3;

SW:6.35 mm; T max.:200 °C; s1:41 mm; G:M10x1; S:32 mm; A5:50 mm; A3:4 mm; C:113.36 kN; H:190 mm; A:55 mm;