Needle Non Thrust Roller Bearings

Contact Now

The most economical type of needle roller bearing is a full-complement of loose needle rollers assembled directly between a hardened and ground shaft and housing. Generally, hardened end washers provide axial location. This type appears in many applications such as those where a hardened and ground gear bore serves as the outer raceway.

When application requirements are met and assembly is not difficult, a full complement of rollers forms a bearing of small cross section and high load capacity. It is the lowest-cost rolling bearing per pound of capacity, and is of particular advantage where production rates justify automated assembly equipment.

Needle rollers come in several end configurations. Controlled contours have also been developed to reduce roller-end stress concentrations from misalignment or deflection of one or both raceways under load. Controlled contour refinement brings more uniform stress distribution and optimum bearing performance.

1.181 Inch | 30 Millimeter x 1.378 Inch | 35 Millimeter x 1.26 Inch | 32 Millimeter IKO LRT303532 Needle Non Thrust Roller Bearings

2.5000 in 1.4300 in
Uncoated -65 to +250 &de

1.181 Inch | 30 Millimeter x 1.378 Inch | 35 Millimeter x 1.201 Inch | 30.5 Millimeter IKO LRT303530-1 Needle Non Thrust Roller Bearings

44 mm 2 x TK 524 ASNH
2 x FRB 22/215 ISO/DIS 185 Gra

11.811 Inch | 300 Millimeter x 13.386 Inch | 340 Millimeter x 4.646 Inch | 118 Millimeter IKO LRT300340118 Needle Non Thrust Roller Bearings

Open -65 to +250 &de
Chrome Steel 1.0000 in

1.102 Inch | 28 Millimeter x 1.26 Inch | 32 Millimeter x 0.787 Inch | 20 Millimeter IKO LRT283220 Needle Non Thrust Roller Bearings

Lubrication Fitting 94 mm
Contact with Slinger 1110 kgf
1/11